GNSS Re-Radiator - Channel

Home | Industrial & Automotive

GNSS Re-Radiator - Channel

GNSS Re-Radiator - Channel

GNSS Re-Radiator operates by receiving GPS/GLONASS/Beidou2/IRNSS satellite signals with an antenna located at the Roof top outside of the building (To open Sky view), with Lightning Protector and In-line amplifier, which is used to Protect Co-axial cable and Boost the signal strength, Received signals send to the GNSS Re-Radiator, Re-Radiator Amplified Signals and Split into different Channel using Splitter (ex.4/8/16/32/64 channels). Using LMR 240 cable up to 40 meter length, Each channel can transmit with same signal strength through Different Passive antenna which can cover around 5~10 meter Radius.

Contact Us

Typical Application

Mobile Phone Testing

Vehicle Tracking Testing

GPS Hand Held Testing

Car navigators Testing

Military Equipment testing @ indoors

Dashboard Testing

Survey product

Aviation Hanger

Public Transportation

Roof Antenna
Passive Antenna

Technical Characterstics

Digital gain display: LED digital display shows current amplifier gain.

Touch-tone gain adjustment: upper and lower key, we can adjust the gain.

Power control : Toggle the power switch, easy control power supply state.

Serial command control.

GNSS re-radiator device will support for below frequencies
GPS : L1 / L2 / L5
GLONASS : L1 / L2 / L3
BeiDou : B1 / B2 / B3
QZSS : L1 / L2 / L5
Galileo : E1 / E1a / E5a / E5b / E6
IRNSS : L5, SBAS

The device features 0-30dB gain and a noise figure less than 3dB.

LMR 240 Cable used to connect Passive antenna up to 40 meter.

LMR 400 Cable used to connect From Roof Top antenna to Device maximum 120 meter.

Order For Below Part No.

V3N-GNSS-RR-04 ( 4 Channel Re-Radiator )

V3N-GNSS-RR-08 ( 8 Channel Re-Radiator )

V3N-GNSS-RR-16 ( 16 Channel Re-Radiator )

Also 32 And 64 Channel Available

Ordering Guide
Ordering Guide
Ordering Guide
Ordering Guide