LabSat 3 Wideband

Home | Industrial & Automotive

LabSat 3 Wideband

LabSat 3 Wideband

GNSS Record and Replay with a recording bandwidth of up to 56MHz
LabSat is recognised as the most cost effective and intuitive GNSS simulator available. New to the LabS at range of GNSS Record and Replay devices is LabSat 3 Wideband, which continues with the established reliability, cost-effectiveness, and simplicity of operation that are the benchmarks of the LabSat system.

Contact Us

A 56MHz recording bandwidth at 4 or 6 bit allows for the capture of a very wide range of live-sky satellite signals:

GPS : L1 / L2 / L5

GLONASS : L1 / L2 / L3

BeiDou : B1 / B2 / B3

QZSS : L1 / L2 / L5

Galileo : E1 / E1a / E5a / E5b / E6



Contact Us
LabSat 3 Wideband

Standard Features

Wide bandwidth recording at up to 56MHz

Three RF channels

4 or 6 bit capture

One touch record and replay

Synchronized external data recording

1TB removable SSD

Internal battery - up to two hours of use

Standalone operation, or via external control

Compact form factor; only 1.2kg

Internal web server for easy control

Typical Application

LabSat 3 Wideband is suitable for the testing and development of a whole host of products within a wide variety of applications:


Autonomous vehicles

Surveying equipment

Personal monitoring devices


End of line product testing

Specifications of LabSat 3 Wideband
Constellations GPS L1, L2, L5; Galileo E1, E5a/b, E6; GLONASS L1, L2, L3; BeiDou B1, B2, B3;
QZSS L1, L2, L5; IRNSS L5, in Band SBAS,
user defined frequency bands like Iridium & SiriusXM radio.
Output Signal Level Adjustable -73dBm to -160dBm
RF Channels 3
RF Channel 1 Centre Frequency Selectable
RF Channel 2 Centre Frequency Selectable
RF Channel 3 Centre Frequency Selectable
Number of Satellites Observed All in view
Sampling Frequency 10.23 MHz, 30.69 MHz, 60 MHz
Bandwidth 10 MHz, 30 MHz, 56 MHz
Quantization 1, 2 or 3 bit (I & Q)
Data Format I & Q
Additional Logging 2x CAN channels, 4x Digital channels,1x Rs232 channel
Removable Battery Pack Yes
Media Storage Included 1TB SSD & 4GB SD card (SD card for firmware upgrade only)
Active Antenna Voltage Supply 3.3 v
Reference Oscillator 10 MHz OCXO, Temperature Stability +/- 0.05 ppm, Frequency
Stability +/- 0.3 ppm over first year
Operating Voltage 8v to 30 VDC
Size 167mm x 128mm x 46mm
Weight 1.2 Kg

What is Satgen V3 ?

SatGen v3 is RACELOGIC's GNSS scenario generation software which enables you to create a data file, based on a user-generated trajectory file that can be replayed on a LabSat GNSS Simulator. With SatGen v3 you can generate a scenario to simulate a test anywhere in the world, with position, route, speed, date and time all defined by the user.

What Constellations can I create ?

1. Single Constellation
Create single constellation scenario files for GPS L1, GLONASS L1 or BeiDou B1

2. Dual Constellation
Create dual or single constellation scenario files for GPS L1, GLONASS L1 or BeiDou B1

3. Triple Constellation
Create triple, dual or single constellation scenario files for GPS L1, GLONASS L1 or BeiDou B1

4. Wideband
Create Wideband scenario files for GPS: L1 C / A, M1, P. L2, C, P, M1. L5, I, Q. GLONASS: L1OF, L2OF. BeiDou: B1I, B-2I, B2I

Satgen V3
Technical Specifications of Satgen Software
Contellation all Variants GPS / GLONASS / BieDou2
Data Format IF, I, Q, I&Q
Quantisation 1-bit, 2-bit, 3-bit
File Format .bin / .ls2 /.ls3 / .LS3W
File Size / Duration Unlimited
Almanac File format .ALM / .AGL
NMEA Input File Format $GGA
Operating System Win 7 64-bit, Win 8 64-bit, Win 10 64-bit