Rugged GNSS Receiver WOD

Home | Military & Aerospace

Rugged GNSS Receiver WOD

Rugged GNSS Receiver WOD

V3Novus Rugged GNSS Receiver is a GPS, GLONASS, QZSS, BeiDou, GALILEO, IRNSS L5 and S-Band Receiver designed and built to meet Military Standards, Our receiver is a Concurrent Receiver Supporting IRNSS L5 and S-Band along with other GNSS Frequencies.

Contact Us
Receiver Specifications
No. of GNSS Constellations 05
Signals GPS L1(C/A)/L2(C)/L5, GLONASS
Galileo E1/E5a, BeiDou B1/B2,
IRNSS L5/S-band* (Refer Ordering Guide)
Cold Start TTFF < 45 seconds (95%)
Hot Start TTFF < 20 seconds (95%)
Sensitivity -136 dBm Acquisition -155 dBm Tracking
Positioning Modes GPS Only GLONASS Only Combined GPS and
GLONASS Differential GPS IRNSS Only
Position Accuracy Standalone mode: 1.5m(H) 2m(V) (95%)
With SBAS: < 1m(H) 1.4m(V) (95%)
With DGPS: 0.25m(H) 0.5m(V) (95%)
With RTK: 5 mm + 0.5 ppm (H) 8 mm
+ 1.0 ppm (V) (95%)
Velocity Accuracy 0.2 m/s, (95%)
Time Accuracy <100 ns (95%)
Update rate 1Hz ~ 20Hz
Dynamics Max Velocity: 515 m/s Max Acceleration: 4g
Altitude Max Altitude: 18,000 m Min Altitude: -1000m
Electrical Specifications
Power Input 9-36V DC Continuous
Power Consumption < 3 Watts
Operating temperature –40 °C to +80 °C
Storage temperature –55 °C to +85 °C
Physical Specifications
Dimensions (L x W x H) 170 mm x 120 mm x 50 mm
Weight ~1.4 kg
Installation FLANGE Mount
Cooling Passive Conduction
Chassis Aluminum alloy
Color NATO Green
Mass Continuity Severity as per MIL-STD-461F
MTBF 20000 hours
Standards and Certifications
Power +24V DC Power Supply
Antenna Port GPS / GLONASS / Galileo / BeiDou / NavIC
active Antenna (+ 5.5 V / 100 mA max.)
Ethernet Port 10 / 100 / 1000M Ethernet Interface
Serial Port Isolated RS422 / RS485 Transmitter: NMEA
0183 Version 3.01, Built in Test (BIT) message
Isolated RS422 / RS485 Receiver: ASCII
Commands,1PPS Isolated Logic Signal
Serial Port Isolated RS422 / RS485 Transmitter:
Same as COM1
Isolated RS422 / RS485 Receiver:
RTCM SC104 Ver 2.1, 2.3
Military Grade EMC Compliance
EMC (MIL-STD 461E/F Compliance)
EMC Test Spec Type of Test Frequency Range Requirement
CE101 Conducted Emissions 30Hz ~10kHz 30Hz ~ 1kHz :110 dB 1k-10k:110-90 dB
CE102 Conducted Emissions 30Hz ~10kHz 10kHz ~ 500KHz: 100-66dB, 500KHz~10MHz:66dB
RE101 Radiated Emissions 30Hz ~100kHz (30~100k :180-110 dBpT)
RE102 Radiated Emissions 10kHz ~ -18GHz (2MHz~18G Hz: 44-89 dB)
Vibration 5 ~ 500 Hz, 1.48 & 1.90 & 2.24 Grms, Method 514.6 / Procedure I
Shock Method 516.6 / Procedure I
Ordering Guide
V3N-GNSS-01 GPS, Glonass, QZSS, BieDoa,IRNSS L5, SBAS
V3N-GNSS-02 GPS, Glonass, QZSS, BieDoa, IRNSS L5, S-Band,SBAS

Rugged GNSS Receiver WOD

Rugged GNSS Receiver WOD


Multi GNSS Receiver Supportng GPS / GLONASS / Galileo / BeiDou / IRNSS / QZSS L1, L2, L3, L5, E1, E5a, E5b, E6, B1, B2, B3 Band and S-Band.

Rugged Construction to meet MIL Standards

NMEA 3.01 Output message

On Board Display to show Lat, Long, Alt, No.of Satellites, UTC/IST Time.

Isolated Serial Ports

10/100/1000 Ethernet Interface

Low power consumption


GPS, GLONASS, QZSS, BeiDou, GALILEO, IRNSS L5 and S-Band Receiver for Military applications

Rugged construction to meet MIL Standards

Compliance with CE, RoHS

Qualification as per MIL-810G, MIL461F

Concurrent GNSS Engine