Satellite Orbit Track VER - 1.1

Home | Military & Aerospace

Satellite Orbit Track VER - 1.1

Satellite Orbit Track VER - 1.1

V3 Novus Satellite Orbit Tracker (Sat Orb Track) - Sat Orb Track is mainly used to receive L-band single tone Beacon, accurately estimate its power and is translated to digital (RS232, Ethernet, RS422) and analog voltage. The superior acquisition time and amplitude stability enable it to simultaneously meet the satellite - seeking applications of portable station, static and dynamic antenna systems. The product has the characteristics of high sensitivity, wide dynamic range and short acquisition time.

Contact Us

Technical Specification

RF Specifications
INPUT CONNECTOR N-type MMCX, 50 Ohm
INPUT FREQUENCY RANGE 950MHz to 2200MHz
WORKING THRESHOLD C/N0≤40dBc/Hz
INPUT LEVEL RANGE -115dbm to -20dbm
MAXIMUM INPUT POWER -20dbm
DETECTION BANDWIDTH ±30 to ±100KHz
TRACKING BANDWIDTH ±100KHz
DETECTED BEACON LEVEL FILTERING Low-Pass, 0.5 Hz, fixed
Performance
SEARCH/TRACK RATE 2ms
ACQUISITION TIME 4ms(Typically)
DYNAMIC RANGE 75 dB or greater typical
AMPLITUDE ACCURACY ±1 dB typical
FREQUENCY ACCURACY ±1 kHz typical
TRACKING TYPE BEACON TRACKING
STEP SIZE 1 KHz
M & C
ETHERNET 10/100 Base-T, RJ-45 Connector
IP ADDRESS DHCP or Static
CONTROL APPLICATION In built Webpage
APPLICATION PROGRAMMING INTERFACE (API) POSIX-compliant ‘C’
PROTOCOL User Defined. (V3Novus Format)
• Customized format upon request
RECEIVER OUTPUT VIA PHYSICAL OUTPUTS Ethernet, RS232 & RS422
RECEIVER OUTPUT VIA
M & C INTERFACE
YES
Power
CONNECTOR 4P Micro Fit
Connector (J1)
POWER SUPPLY +24V, 2A
Physical
DIMENSIONS 93x69
mm (LXW)
WEIGHT 300 g
Environmental
OPERATING TEMPERATURE -40°C to 80°C
STORAGE TEMPERATURE -55°C to 85°C
HUMIDITY 0 to 95%, non-condensing
Receiver Outputs
ANALOG INTERFACE 2P Micro Fit Connector(J4)
ANALOG SIGNAL STRENGTH 0 to 10 VDC, 50 mA max
INDICATOR LEVEL: 0.25 to 2.5 Volts/dB
ANALOG SLOPE DIGITAL LOCK INDICATOR OUTPUT +3V3,100mA
DIGITAL LOCK INDICATOR OUTPUT POLARITY Adjustable (H=LOCK or L=LOCK)
View

Indicators Details

Red LED : Power LED

Green LED : Activity LED

Connector Details

J1 : Power Input Connector (24VDC)

J2 : Ethernet Connector (ETH)

J3 : RS232 & RS422 Connector (RS232 & RS422)

J4 : Analog Output Connector (0-10) VDC

J5 : RF-IN Connector (N-type MMCX)