Satellite Orbit Track
V3 Novus Satellite Orbit Tracker ( Sat Orb Track ) - Sat Orb Track is mainly used to receive L-band single tone Beacon, accurately estimate its power and is translated to digital ( RS232, Ethernet, RS422 ) and analog voltage. The superior acquisition time and amplitude stability enable it to simultaneously meet the satellite-seeking applications of portable station, static and dynamic antenna systems. The product has the characteristics of high sensitivity, wide dynamic range and short acquisition time.
Contact Us
Technical Specification
| RF Specifications | |
|---|---|
| INPUT CONNECTOR | MMCX, 50 Ohm |
| INPUT FREQUENCY RANGE | 950MHz to 2200MHz |
| WORKING THRESHOLD | C/N0≤40dBc/Hz |
| INPUT LEVEL RANGE | -115dbm to -20dbm |
| MAXIMUM INPUT POWER | -20dbm. |
| DETECTION BANDWIDTH | ±30 to ±100KHz |
| TRACKING BANDWIDTH | ±100KHz |
| DETECTED BEACON LEVEL FILTERING | Low-Pass, 0.5 Hz, fixed |
| Performance | |
|---|---|
| SEARCH/TRACK RATE | 2ms |
| ACQUISITION TIME | 4ms(Typically) |
| DYNAMIC RANGE | 75 dB or greater typical |
| AMPLITUDE ACCURACY | ±1 dB typical |
| FREQUENCY ACCURACY | ±1 kHz typical |
| TRACKING TYPE | BEACON TRACKING |
| M & C | |
|---|---|
| ETHERNET | 10/100 Base-T, RJ-45 Connector |
| IP ADDRESS | DHCP or Stac |
| CONTROL APPLICATION | In built Webpage |
| APPLICATION PROGRAMMING INTERFACE (API) |
POSIX-compliant ‘C’ |
| PROTOCOL | User Defined. (V3Novus Format) • Customised format upon request |
| RECEIVER OUTPUT VIA PHYSICAL OUTPUTS |
Ethernet, RS232 & Rs422 |
| RECEIVER OUTPUT VIA M & C INTERFACE |
YES |
| Power | |
|---|---|
| CONNECTOR | 4P Micro Fit Connector (J13) |
| POWER SUPPLY | +24V, 2A |
| INDICATOR | DC Power Indicator LED |
| Physical | |
|---|---|
| DIMENSIONS | 169x90 mm (LXW) |
| WEIGHT | 320 g |
| Environmental | |
|---|---|
| OPERATING TEMPERATURE | -40°C to 80°C |
| STORAGE TEMPERATURE | -55°C to 85°C |
| HUMIDITY | 0 to 95%, non-condensing |
| OPERATING ALTITUDE | Up to 8000m |
| Receiver Outputs | |
|---|---|
| ANALOG INTERFACE | 2P Micro Fit Connector(J7) |
| ANALOG SIGNAL STRENGTH | 0 to 10 VDC, 50 mA max |
| INDICATOR LEVEL: | 0.25 to 2.5 Volts/dB |
| ANALOG SLOPE DIGITAL LOCK INDICATOR OUTPUT | +3V3, 100mA |
| DIGITAL LOCK INDICATOR OUTPUT POLARITY | Adjustable (H=LOCK or L=LOCK) |
Connector Details
J13 : Power Input Connector (9-36) VDC
J10 : Ethernet Connector (ETH)
J20 : RS232& RS422 Connector (RS232-RS422)
J7 : DAC Connector (0-10) VDC
J4 : Sat Orb Track Interface. (MMCX Female-RF-INPUT)
Site by Websmartindia
All rights reserved to V3 Novus Pvt.Ltd